To install a lock on a JOBOX chest, you'll
find, included in the box, an accessory kit
that contains a lock retainer, a nylon spacer,
an eye hook retainer pin, and a self-tapping
First place the lock retainer flange side
Then, place the nylon spacer in the channel
and insert the lock through the lock retainer
and nylon spacer.
Move the locking mechanism bar to the left
and insert the retainer and lock into the
lock housing with the flange side down.
Open the chest and insert the I-hook in the
lock housing through the top hole in the lock
Then, fasten the i-hook with the self-tapping
Here's a JOBOX lock tip: the most common lock
used for JOBOX chests is a Master Lock #5.
It comes in two types - standard and commercial.
If you're using the commercial Master Lock,
we recommend removing the rubber bumper from
the top of the lock.
This will help prevent the lock from sticking
inside the lock housing.